Spot Welding Support CONTROLLERS AND TIMERS Trouble Shooting Page

Testing the controller/timer is a simple process. Make sure you know what the problem is first and then, while in "NO - WELD" mode, test the dry-run funtions of the machine with the timer.

You can click here to go to the Trouble Shooting page

Be very safe as you do this. If this is working correctly then refer to the documetation of the timer and finally proceed with testing the SRC and TX by clicking here.


Was this information helpful?

Yes

No

Back

More Info Needed - send email

Basics	Extras
MFDC Controllers	3 Phase
Entron	Intertron
Unitrol	WTC, Medar & Robotron
Trouble Shooting -- You Are Here	Testing SCR's
Documentation Available	Specifications for Download
Floating TX Requirements	Repair, Rebuild or Replace




• For more information e-mail to: welding engineer
or call 317-251-9406
_____________________________________________________© rwesco 2007